Journal Papers

1. "FORMATION OF MOLTEN SN AND SN-PB DROPLETS IN MAGNETOHYDRODYNAMIC PUMPS"
   فرید باقرپور, Alireza Sadeghi, Kambiz Ghaemi Osgouie
   The Saybold Report Journal, Vol. 18, No 5, 2023
2. "Numerical study of the effect of weather parameters on corona discharge performance in a horizontal axis wind turbine"
   Saeid Abed Zahmatkesh Pasand, Kambiz Ghaemi Osgouie, Saeed Karimian Aliabadi, Mohammad Moshfeghi
   International Journal of Nonlinear Analysis and Applications, Vol. 14, No 3, 2023
3. "The manufacture and study of the microstructure, mechanical properties, and corrosion behavior of Fe31Cr15Mo14C10B10Si5Ti15 metallic glass thin film, prepared by the magnetic sputtering method"
   Abdollah Tayebi, Abbas Rastgo Ghamsari, Kambiz Ghaemi Osgouie
   JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 595, No 121805, 2022
4. "Experimental Parameter Identification for Moving Base Nonholonomic Robot Consisting Primary Joints"
   Kambiz Ghaemi Osgouie, Alireza Ghanbarpour
   International Journal of Advancements in Technology, Vol. 11, No 2, 2020
5. "Using the Matrix Method to Compute the Degrees of Freedom of Mechanisms _"
   Kambiz Ghaemi Osgouie, Bahman Gard
   Journal of Applied and Computational Mechanics, Vol. 3, No 3, pp.158-170, 2017
6. "Optimization of kinematic redundancy and workspace analysis of a dual-arm cam-lock robot"
   Behnoush Rezaeian Jouybari, Kambiz Ghaemi Osgouie, Ali Meghdari
   ROBOTICA, Vol. First View, pp.1-20, 2014
7. "Selection of Optimum Thread Type in Implants to Achieve Optimal Biomechanical Properties by Using 3D Finite Element Method"
   Zeinab Arsalanloo, Reza Telchi, Kambiz Ghaemi Osgouie
   International Journal of Bioscience, Biochemistry and Bioinformatics, Vol. 4, No 3, pp.185-190, 2014
8. "Smooth Trajectory Planning for 3-UPU Parallel Manipulator"
   Kambiz Ghaemi Osgouie, Amir Hossein Asfia, Mohamad Hossein Sadooghi, Abolfazl Ahmadi Kazemabadi
   Applied Mechanics and Materials, Vol. 464, No 1, pp.285-292, 2013
9. "Introducing Neural Networks as a Computational Intelligent Technique"
   Aydin Azizi, Farshid Entesari, Kambiz Ghaemi Osgouie, Amirhossein Rezaei Rashnoodi
   Applied Mechanics and Materials, Vol. 464, No 1, pp.369-374, 2013
10. "Modular Framework Kinematic and Fuzzy Reward Reinforcement Learning Analysis of a Radially Symmetric Six-Legged Robot"
    Mohammadali Shahriari, Kambiz Ghaemi Osgouie, Amir Ali Akbar Khayyat
    Life Science Journal, Vol. 10, pp.120-129, 2013
11. "Intelligent Mobile Robot Navigation in an Uncertain Dynamic Environment"
    Aydin Azizi, Farshid Entesari, Kambiz Ghaemi Osgouie, Mostafa Cheragh
    Applied Mechanics and Materials, Vol. 367, No 1, pp.388-392, 2013
12. "Modeling of Melatonin Behavior in Major Depression: A Fuzzy Logic Modeling"
    Aydin Azizi, Kambiz Ghaemi Osgouie, Sajad Rashidnejhad, Mostafa Cheragh
    Applied Mechanics and Materials, Vol. 367, No 1, pp.317-321, 2013
13. "Optimal Trajectory Planning for Parallel Robots Considering Time-Jerk"
    Sajad Rashidnejhad, Amir Hossein Asfia, Kambiz Ghaemi Osgouie, Ali Meghdari, Aydin Azizi
    Applied Mechanics and Materials, Vol. 390, No 1, pp.471-477, 2013
14. "Optimal Balancing of a 3-RPS Robot Manipulator Using Genetic Algorithm"
    Hossein Javaherchi, Kambiz Ghaemi Osgouie, Amir Ali Akbar Khayyat
    Applied Mechanics and Materials, Vol. 390, No 1, pp.377-382, 2013
15. "Conceptual Design and Simulation of a Semi-Automatic Cell for the Washing and Preparation of a Corpse Prior to an Islamic Burial"
    Ali Meghdari, Kambiz Ghaemi Osgouie, Ehsan Nasiri, A.r. Nemati, A.m. Mortazavi
    International Journal of Advanced Robotic Systems, Vol. 9, No 42, 2012
16. "The Design of PIP Controller for a Thermal System with Large Time Delay"
    Seiyed Hamid Zareh, Amir Sarrafan, Kambiz Ghaemi Osgouie
    World Academy of Science, Engineering and Technology, Vol. 3, No 8, pp.1023-1027, 2009
17. "Optimal configuration of dual-arm cam-lock robot based on task-space manipulability"
    Kambiz Ghaemi Osgouie, Ali Meghdari, Saeed Sohrabpour
    ROBOTICA, Vol. 27, No 1, 2008
18. "Disadvantages of Wind Turbines"
    Ali Amin, Masood Amin, Mahdi Hosseinzadeh Bahraini, محمدرضا بیگلری, Kambiz Ghaemi Osgouie
    Scientific Journal of Research in Science and Engineering, Vol. پاییز 1400, 2021
19. "Trajectory Generation for Planar Redundant Robots Using Pontryagin's Principle in Optimal Control"
    Assal Haghighatpars, Kambiz Ghaemi Osgouie, Faezeh Farivar
    Iranian Journal of Mechanical Engineering,, Vol. 20, No 3, pp.1-19, 2018
20. "Finite element study of thread type of implant in anterior situation"
    Zeinab Arsalanloo, Reza Telchi, Kambiz Ghaemi Osgouie, Latif Torabinejhad
    مجله دانشکده دندانپزشکی مشهد, 2015
21. "Joint space kinematic optimization of the dual-arm cam-lock robot"
    Sajad Rashidnejhad, Kambiz Ghaemi Osgouie, Ali Meghdari
    Mechanical Engineering modares, Vol. 14, No 11, pp.127-136, 2014

Conference Papers

1. "Kinematics and Jacobian analysis of a three DOF sufficiently actuated largescale cable-driven robot with insufficient actuated structure"
   Kambiz Ghaemi Osgouie, Assal Haghighatpars, Ali ElKamel, Azadeh Maroufmashat
   Fourth North American International Conference on Industrial Engineering and Operations Management, 2019
2. "Kinematic Effects of Gimbal Joints on a 3URU Parallel Manipulator ."
   Sina Baghi, Fariborz Razban, Kambiz Ghaemi Osgouie
   the ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis (ESDA2012), 2012
3. "Employing Neural Networks for Manipulability Optimization of the Dual-Arm Cam-Lock Robot"
   Behnoush Rezaeian Jouybari, Kambiz Ghaemi Osgouie, Ali Meghdari
   the ASME 2010 International Mechanical Engineering Congress & Exposition (IMECE2010), 2010
4. "The select of a permanent magnet brushed DC motor with optimal controller for providing propellant of @Home Mobile Robot"
   Seiyed Hamid Zareh, Maryam Khosroshahi, Meysam Abbasi, Kambiz Ghaemi Osgouie
   2010 IEEE International Conference on Mechatronics and Automation, 2010
5. "Neural networks control of autonomous underwater vehicle"
   Reza Amin, Amir Ali Akbar Khayyat, Kambiz Ghaemi Osgouie
   2nd International Conference on Mechanical and Electronics Engineering (ICMEE), 2010
6. "Neural networks modeling of autonomous underwater vehicle"
   Reza Amin, Amir Ali Akbar Khayyat, Kambiz Ghaemi Osgouie
   IEEE/ASME International Conference on Mechatronics and Embedded Systems and Applications (MESA2010), 2010
7. "Modeling and Simulation of Non-Contact Atomic Force Microscope"
   Mohammadreza Bahrami, Asghar Ramezani, Kambiz Ghaemi Osgouie
   ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010), 2010
8. "Design Optimization Of Gimbal Robotic Joints Based On Task Space Manipulability"
   Foad Mohammadi, Iman Hemmatian, Kambiz Ghaemi Osgouie
   ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA2010), 2010
9. "Effects of Gimbal Drives on Optimal Path of Robotic Arms"
   Foad Mohammadi, Iman Hemmatian, Kambiz Ghaemi Osgouie
   The 1st Joint International Conference on Multibody System Dynamics (IMSD 2010), 2010
10. "A Planar Hybrid Self-Balancing Jumping Mechanism"
    Arash Fallahnejhad, Kambiz Ghaemi Osgouie
    The 1st Joint International Conference on Multibody System Dynamics (IMSD 2010), 2010
11. "Gimbal Robotic Joints: Kinetostatic Analysis"
    Foad Mohammadi, Iman Hemmatian, Kambiz Ghaemi Osgouie
    Annual International Conference on Mechanical Engineering (ISME 2010), 2010
12. "Optimizing fuzzy logic controller for diabetes type I by genetic algorithm"
    Aydin Azizi, Kambiz Ghaemi Osgouie
    The 2nd International Conference on Computer and Automation Engineering (ICCAE2010), 2010
13. "Dermal wound healing-remodeling phase: A biological review"
    Aydin Azizi, Kambiz Ghaemi Osgouie
    The 2nd International Conference on Computer and Automation Engineering (ICCAE2010), 2010
14. "Modeling of forced dermal wound healing using intelligent techniques"
    Aydin Azizi, Kambiz Ghaemi Osgouie
    The 2nd International Conference on Computer and Automation Engineering (ICCAE2010), 2010
15. "Mathematical modeling of dermal wound healing: A numerical solution"
    Aydin Azizi, Kambiz Ghaemi Osgouie
    The 2nd International Conference on Computer and Automation Engineering (ICCAE2010), 2010
16. "Manipulability analysis for Gimbal driven robotic arms"
    Foad Mohammadi, Iman Hemmatian, Kambiz Ghaemi Osgouie
    IEEE International Conference on Robotics and Biomimetics (ROBIO2009), 2009
17. "Optimal task-space manipulability of hybrid 4-DOF dual-arm CAM-lock manipulators"
    Kambiz Ghaemi Osgouie, Ali Meghdari, Saeid Sohrabpour
    5th International Symposium on Mechatronics and Its Applications (ISMA 2008), 2009
18. "Genetic algorithm based optimization for Dual-Arm Cam-Lock robot configuration"
    Kambiz Ghaemi Osgouie, Ali Meghdari, Saeid Sohrabpour, Mehdi Salmani Jelodar
    2007 IEEE/ASME international conference on advanced intelligent mechatronics, 2007
19. "Optimal configuration of a 4-DOF dual-arm cam-lock manipulator"
    Kambiz Ghaemi Osgouie, Ali Meghdari, Saeid Sohrabpour, Mehdi Salmani Jelodar
    ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2007